AD620 Instrumentation Amplifier
The AD620 is a low cost, high accuracy instrumentation amplifier that requires only one external resistor to set gains of 1 to 10,000.
ICs
LM201 Single Operational Amplifier
The LM201 is a general-purpose operational amplifier. Supply voltage is in range of ±5 V to ±22 V.
AT24C04 4-Kbit Serial EEPROM
The AT24C04 provides 4096 bits of serial electrically erasable and programmable read-only memory (EEPROM) organized as 512 words of 8 bits each.
MC14584 Hex Schmitt Trigger
The MC14584 IC is constructed with MOS P−channel and N−channel enhancement mode devices in a single monolithic structure. MC14584 IC primarily used where low power dissipation and/or high noise immunity is desired.
TLV9004 Low Power, 4 Channel, 1MHz Op-Amp
The TLV9004 is a quad-channel low-voltage (1.8 V to 5.5 V) operational amplifier with rail-to-rail input and output swing capabilities.
74LVC2G80 Positive Edge Triggered D Flip-Flop
74LVC2G80 flip-flop IC is designed for 1.65-V to 5.5-V VCC operation. This IC is fully specified for partial-power-down applications using Ioff.
LM709 Operational Amplifier
The LM709 series is a monolithic operational amplifier intended for general-purpose applications. Operation is completely specified over the range of voltages commonly used for these devices.
TCPP01M12 - USB Port Protection IC for quick migration to Type-C Connector
The TCPP01-M12 from STMicroelectronics is a Microcontroller (MCU) companion IC that works with the 20V/100W USB Type-C Power Delivery controlled integrated with ST’s STM32G0 and STM32G4 MCUs.
NCP3066 Constant Current Regulator
NCP3066 or NCV3066 is a monolithic constant current regulator IC used for LED lighting applications. This IC can be found in marine, automotive lighting or any portable lighting applications.
74LS32 Quad-2-Input OR Gate
The 74LS32 is a Dual Input OR Gate with Quad package.
Capable of supporting up to 32 GT/s without altering design
3M™ TwinAx High Speed Cable Solutions: Thin, low profile cable with extremely tight bend radii
Advantech's WISE-750 vibration PHM gateway is developed to perform predictive maintenance.
Industrial plating option with enhanced durability for a variety of harsh environments
ECS-3215MV-327KE compact 32.768 kHz MultiVolt oscillators offers low 1.3 µA current consumption.
Hammond’s modern 1556 series enclosures are designed for circuit boards and IoT equipment
Optimized with highly sensitive cap touch sensors, extensive peripheral circuits and 125℃ operation
KEMET's automotive PCB-mount relays unique structure offers high performance and productivity