LM201 Single Operational Amplifier
The LM201 is a general-purpose operational amplifier. Supply voltage is in range of ±5 V to ±22 V.
ICs
AT24C04 4-Kbit Serial EEPROM
The AT24C04 provides 4096 bits of serial electrically erasable and programmable read-only memory (EEPROM) organized as 512 words of 8 bits each.
MC14584 Hex Schmitt Trigger
The MC14584 IC is constructed with MOS P−channel and N−channel enhancement mode devices in a single monolithic structure. MC14584 IC primarily used where low power dissipation and/or high noise immunity is desired.
TLV9004 Low Power, 4 Channel, 1MHz Op-Amp
The TLV9004 is a quad-channel low-voltage (1.8 V to 5.5 V) operational amplifier with rail-to-rail input and output swing capabilities.
74LVC2G80 Positive Edge Triggered D Flip-Flop
74LVC2G80 flip-flop IC is designed for 1.65-V to 5.5-V VCC operation. This IC is fully specified for partial-power-down applications using Ioff.
LM709 Operational Amplifier
The LM709 series is a monolithic operational amplifier intended for general-purpose applications. Operation is completely specified over the range of voltages commonly used for these devices.
TCPP01M12 - USB Port Protection IC for quick migration to Type-C Connector
The TCPP01-M12 from STMicroelectronics is a Microcontroller (MCU) companion IC that works with the 20V/100W USB Type-C Power Delivery controlled integrated with ST’s STM32G0 and STM32G4 MCUs.
NCP3066 Constant Current Regulator
NCP3066 or NCV3066 is a monolithic constant current regulator IC used for LED lighting applications. This IC can be found in marine, automotive lighting or any portable lighting applications.
74LS32 Quad-2-Input OR Gate
The 74LS32 is a Dual Input OR Gate with Quad package.
74LS73 Dual JK Flip-Flop
The 74LS73 is a dual in-line JK flip flop IC. It contains two independent J-K flip-flops with individual J-K, clock and direct clear inputs. The 74LS73 is a positive pulse triggered flip-flop.
Combo-D mixed-density D-subs for power, signal, coax, high voltage, and fiber optic applications
The Curiosity PIC64GX1000 Kit ES is an advanced development platform for RISC-V applications
Achieve over 75 W output power with Vishay’s SiC46x family of buck regulators
Low profile and high voltage ratings can be realized by the common mode chokes of the WE-CMB family
ix Industrial IP20 connectors are 10 position connectors with Cat6A 10GBASE-T performance
Aorora spring contacts are available in a variety of heights, materials, and platings
Magnetic current sensors are a compelling alternative to traditional shunt-based solutions
Maximum Power Connections for SWaP-C Optimization
