The PT2399 is an Echo Processor IC that is commonly used to provide digital delay in audio circuits. The IC takes in analog audio input and converts it into digital stream of bits…
The MCP6004 is a Quad Op-amp 14-Pin package. The Op-amps are known for their low power and high bandwidth gain. The bandwidth gain is upto 1MHz and the operating voltage could be…
The OB3350 is a LED Driver IC that is commonly used in powering the backlight of LCD/LED displays or to drive sensitive LEDs at constant current. The IC consists of a PWM boost…
The TSOP1838 is a miniature IR receiver IC form the TSOP18xx series. This particular model TSOP1838 will respond to 38kHz IR signals from remote control devices. It is normally…
The PIC12C508 is low cost 8-Pin Microcontroller from Microchip. It is a simple 8-bit controller with four oscillators including 4MHz internal RC oscillators. The controller is…
The SC8206 is an IC that is used to control commercial Swing Fans with remotes. It is available in 18-pin and 20-pin package and has built in timers, oscillators, speed controls…
The 2SC1345 is a low signal NPN amplifier transistor with a collector to emitter voltage of 50V and collector current of 100mA. The Transistor has a high gain value from 250 to…
The NE5532 is a Dual Low Noise Op-Amp in 8-pin package commonly used as amplifiers in audio circuits for its noise immunity and high output drive capability. The Op-Amp is…
The RC522 is a 13.56MHz RFID module that is based on the MFRC522 controller from NXP semiconductors. The module can supports I2C, SPI and UART and normally is shipped with a RFID…
The 2SC1061 is a NPN Power Transistor in To-220 package. It has a DC current gain from 35 to 320 and transition frequency of 5MHz. It is commonly used in high power amplifier…