Stepstick protector plug is an add-on module to protect precious stepper motor drivers. It is compatible with DRV8825, TMC2100, TMC2130, TMC2208, A4988 stepper drivers. Comes in…
The SM712 TVS Diode Array is specifically designed to protect multi-point data transmission in standard RS-485 applications (-7V to 12V) from damage due to electrostatic discharge…
The MIC5205 is a low current, very low dropout voltage regulator with a maximum current of 150mA and a voltage drop of 165mV at full load. MIC5205 has an Enable pin to provide…
The AN6884 is a monolithic integrated circuit driving 5-LED and is capable of logarithmic (dB) bar graph display for input signal. Operating voltage range for AN6884 is 3.5 V to…
The TMC2209 is an ultra-silent motor driver IC for two-phase stepper motors. The driver has a maximum output capacity of 28 V and ± 2 A. It can operate bipolar stepper motors from…
NEMA (National Electrical Manufacturers Association) 34 is a stepper motor with a 3.4×3.4 inch faceplate and 1.8° step angle. Each phase draws 4.0 A, allowing for a holding torque…
The DRV8825 is a Motor Driver with two H-bridge drivers and a microstepping indexer. The driver has a maximum output capacity of 45 V and ± 2.5 A. It can operate bipolar stepper…
NEMA 23 is a stepper motor with a 2.3×2.3 inch (58.4×58.5 mm) faceplate and 1.8° step angle (200 steps/revolution). Each phase draws 2.8 A at 3.2 V, allowing for a holding torque…
The A4988 is a complete Microstepping Motor Driver with built-in translator for easy operation. The driver has a maximum output capacity of 35 V and ± 2 A. It can operate bipolar…
NEMA 17 is a hybrid stepping motor with a 1.8° step angle (200 steps/revolution). Each phase draws 1.2 A at 4 V, allowing for a holding torque of 3.2 kg-cm. NEMA 17 Stepper motor…