The SM712 TVS Diode Array is specifically designed to protect multi-point data transmission in standard RS-485 applications (-7V to 12V) from damage due to electrostatic discharge…
The MIC5205 is a low current, very low dropout voltage regulator with a maximum current of 150mA and a voltage drop of 165mV at full load. MIC5205 has an Enable pin to provide…
The AN6884 is a monolithic integrated circuit driving 5-LED and is capable of logarithmic (dB) bar graph display for input signal. Operating voltage range for AN6884 is 3.5 V to…
The TMC2209 is an ultra-silent motor driver IC for two-phase stepper motors. The driver has a maximum output capacity of 28 V and ± 2 A. It can operate bipolar stepper motors from…
NEMA (National Electrical Manufacturers Association) 34 is a stepper motor with a 3.4×3.4 inch faceplate and 1.8° step angle. Each phase draws 4.0 A, allowing for a holding torque…
The DRV8825 is a Motor Driver with two H-bridge drivers and a microstepping indexer. The driver has a maximum output capacity of 45 V and ± 2.5 A. It can operate bipolar stepper…
NEMA 23 is a stepper motor with a 2.3×2.3 inch (58.4×58.5 mm) faceplate and 1.8° step angle (200 steps/revolution). Each phase draws 2.8 A at 3.2 V, allowing for a holding torque…
The A4988 is a complete Microstepping Motor Driver with built-in translator for easy operation. The driver has a maximum output capacity of 35 V and ± 2 A. It can operate bipolar…
NEMA 17 is a hybrid stepping motor with a 1.8° step angle (200 steps/revolution). Each phase draws 1.2 A at 4 V, allowing for a holding torque of 3.2 kg-cm. NEMA 17 Stepper motor…
SS54 is a surface mount High Power Schottky Rectifier with a Low voltage drop 0.55V and a high forward current of 5A. This diode has high efficiency and high surge current…