MPSA13 NPN Darlington Transistor
The MPSA13 is an NPN Darlington Transistor with a high DC Gain of 5000 and a high Transition Frequency of 125MHz making it suitable for amplifier designs.
Pin Configuration…
Electronics Components
MPSA06 NPN Amplifier Transistor
The MPSA06 is an 80V 500mA general purpose NPN transistor with a maximum gain value of 100. This makes the transistor suitable for amplifier applications.
Pin Configuration…
MPSA18 NPN Low Noise Transistor
The MPSA18 is a General Purpose NPN Transistor which can operate with low noise and high gain. The transistor has a gain value of 500 to 1500 and can operate at a…
MID400 AC Line Logic Optocoupler
The MID400 is a AC line to logic Power Line Monitor Optocoupler. Meaning, the output of the IC goes low whenever it detects an AC voltage and goes high when no AC voltage is…
KST42 NPN Transistor
The KST42 is a SMD package NPN Transistor that has high collector emitter voltage of 300V and a collector current of 500mA. The transistor is a general purpose…
BAV99 Dual in Series Switching Diode
The BAV99 is a Dual in Series SMD Diode package, meaning there will be two diodes connected in series inside a SMD package. The Diodes can be used for small signal high speed…
NTE123AP NPN Audio Amplifier Transistor
The NTE123AP is a NPN Transistor with collector current of 600mA and Base voltage of 6V. It has a gain value of 100 to 300 and hence can be used in low power audio…
NTE960 5V Positive Voltage Regulator
The NTE960 is a 5V Voltage regulator IC with a maximum output current of upto 1A. It requires no external components and has in-built short-circuit and thermal overload protection…
NTE987 Quad Op-Amp
The NTE987 is a Low power Quad Op-Amp that can operate even in low voltages like 3V. It has differential input stage and a wide operating voltage of 3V to 32V.
Pin…
2N3771 NPN Power Transistor
The 2N3771 is a high current switching transistor that has a collector current of 30A. It is commonly used in Linear switching devices and power supply circuits.
Pin…
Microchip's MPLAB PICkit 5 in-circuit debugger features improved programmer-to-go (PTG) support
A protection IC for three-serial to five-serial cell lithium-ion rechargeable batteries
TE Connectivity's UAM Wi-Fi Triple Band Antennas offer a compact alternative for terminal antennas
onsemi's op amp is suitable for both high-side and low-side current sensing applications
3W-40W PCB mount Medical AC-DC Power Supplies for Class II and BF-rated medical applications
Hammond’s RM series aluminum cases are suitable for 19” rackmount or desktop/benchtop applications.
T6793 CO2 sensor module is designed for applications requiring high-performance in a compact package
16 programmable inputs for connecting digital sensors and eight more relays to operate machines