GT511C3 Fingerprint Scanner Module
The GT-511C3 is a small embedded module that consists of an optical sensor mounted on a small circuit board. The optical sensor scans a fingerprint, and these scans are processed…
Electronics Components
LM556 Dual Timer IC
The LM556 IC is the dual LM555 IC, meaning the LM556 has two timers inside it. Similar to the LM555 IC, LM556 can also be used for all those applications additionally, since this…
TYN608 SCR (Thyristor)
The TYN608 is a standard 8A SCR available in a TO-220AB package that can be used to control medium power AC/DC loads and can handle high current surges.
Pin configuration…
24C04 Two-Wire Serial EEPROM
The 24C04 provides 4096 bits of serial electrically erasable and programmable read-only memory (EEPROM) organized as 512 words of 8 bits each. This IC is used in applications…
UC3844 Current-Mode PWM Controller
The UC3844 is a fixed frequency current-mode PWM controller. This IC is specially designed for Off-Line and DC to DC converter applications with minimum external components.
…
Push Button Switch
Push Button Features
Prevent flux rise by the insert-molded terminal
Snap-in mount terminal
Contact Bounce: MAX 5mS
Crisp clicking by tactile feedback
Dielectric…
ADXL335 Accelerometer Module
The ADXL335 is a small, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. It can measure the static acceleration of gravity in tilt-sensing…
TDA2822 Dual Power Amplifier
The TDA2822 is a dual low power audio amplifier in an 8-Pin plastic dual in-line package. This IC comes with features like low crossover distortion, low quiescent current, and…
LT3750 Capacitor Charge Controller
The LT3750 is a current mode flyback converter that is optimized to charge high voltage capacitors quickly and efficiently using a minimum number of external components.
…
OP07 Single Operational Amplifier IC
The OP07 is an Ultralow Offset Voltage ((75μV maximum) Operational Amplifier with low input bias current (±4nA) and high open-loop gain (200 V/mV). The OP07 is available in epoxy…
Microchip's MPLAB PICkit 5 in-circuit debugger features improved programmer-to-go (PTG) support
A protection IC for three-serial to five-serial cell lithium-ion rechargeable batteries
TE Connectivity's UAM Wi-Fi Triple Band Antennas offer a compact alternative for terminal antennas
onsemi's op amp is suitable for both high-side and low-side current sensing applications
3W-40W PCB mount Medical AC-DC Power Supplies for Class II and BF-rated medical applications
Hammond’s RM series aluminum cases are suitable for 19” rackmount or desktop/benchtop applications.
T6793 CO2 sensor module is designed for applications requiring high-performance in a compact package
16 programmable inputs for connecting digital sensors and eight more relays to operate machines