SN74121N Monostable Multivibrator
SN74121N IC is a Monostable multivibrator with Schmitt-trigger inputs. Monostable multivibrators are also known as one-shot multivibrator.
ICs
MC14071 - Quad 2-Input OR Gate IC
MC14071 IC consists of 4 independent 2-input OR gates. OR gates are used to perform logical addition operations. These are useful in building logic level circuits like Encoder, Decoders, multiplexers, etc.
MOC3063 Zero Cross Triac Optocoupler/Opto-Isolator IC
MOC3063 IC is a 6 pin I/O Optocoupler/Optoisolator with an integrated gallium arsenide Infrared emitting diode optically coupled to a TRIAC output with a Zero-crossing circuit. The IC can provide optical isolation to devices operating at 115/240 VAC lines.
24C64 serial I²C bus EEPROM IC
The 24C64 is an I2C-compatible 64-Kbit EEPROM IC that is organized as 8 K × 8 bits and has a clock frequency of up to 400 kHz. This I2C compliant IC can share a common 2 wire bus allowing up to 8 devices.
LF356 JFET Input Op-Amp IC
LF356 is an op-amp that has a JFET input. These JFET Op-amps are an excellent choice for low noise applications using High or Low source impedance. Having a JFET at the input side increases the bandwidth gain and reduces the input noise of the IC.
CD4049 Hex Buffer Converter (NOT Gate) IC
CD4049 Hex Buffer Converter (NOT Gate) IC is an inverting buffer IC consisting of 6 individual NOT gates present inside.
GMICP2731-10 GaN MMIC Power Amplifier for High RF Output and Signal Quality in Satellite Communications
Microchip Technology has introduced the new GMICP2731-10 Ka-band MMIC (Monolithic Microwave Integrated Circuit) power amplifier that is fabricated based on GaN-on-Silicon Carbide (SiC) technology.
EL817C Optocoupler/Phototransistor IC
EL817C IC is a popular optocoupler IC. The IC like any other optocoupler consists of an infrared emitting diode which is optically coupled to a phototransistor detector.
Combo-D mixed-density D-subs for power, signal, coax, high voltage, and fiber optic applications
The Curiosity PIC64GX1000 Kit ES is an advanced development platform for RISC-V applications
Achieve over 75 W output power with Vishay’s SiC46x family of buck regulators
Low profile and high voltage ratings can be realized by the common mode chokes of the WE-CMB family
ix Industrial IP20 connectors are 10 position connectors with Cat6A 10GBASE-T performance
Aorora spring contacts are available in a variety of heights, materials, and platings
Magnetic current sensors are a compelling alternative to traditional shunt-based solutions
Maximum Power Connections for SWaP-C Optimization
