TPA3118 Mono Amplifier Module
TPA3118 Mono Amplifier is a Class-D stereo efficient, digital amplifier that can drive speakers up to 60W/8Ω.
Audio Amplifier
PAM8403 Stereo Audio Amplifier Module
The PAM8403 is a 2-channel, 3W, class-D audio amplifier module that features low harmonic distortion and h
MD8002A Audio Amplifier
The MD8002A is a mono bridged audio power amplifier capable of delivering 3W of continuous average power to 3Ω BTL load.
TDA8932 Based Audio Amplifier Board
TDA8932 based Audio Amplifier Board module is a digital mono amplifier module that provides 35 Watt output.
LM380 2.5W Audio Power Amplifier
The LM380 is a 2.5W power audio amplifier for consumer applications. In order to hold system costs to a minimum, the gain is internally fixed at 34 dB. The output of LM380 is short circuit proof with internal thermal limiting.
LM4871 Audio Power Amplifier
The LM4871 is a mono bridged audio power amplifier capable of delivering 3W of continuous average power into a 3Ω load with less than 10% THD when powered by a 5V power supply.
LM1875 Audio Amplifier
The LM1875 is a Class-AB Audio Amplifier from Texas Instruments. It can deliver an output power of 20W into a 4Ω or 8Ω speaker with a maximum current of 4A. The IC can operate in single rail or dual rail power supply and is commonly used in high power audio amplifier designs.
TDA2050 32W Audio Power Amplifier
The TDA2050 is a Hi-Fi Audio Amplifier IC from ST Microelectronics with a maximum output power of 32W. It has a high operating voltage of 50V compared to the other TDAxxxx series amplifier ICS.
TDA2003 10W Audio Amplifier
The TDA2003 is an Audio Amplifier IC from ST Microelectronics with a maximum output power of 10W commonly used in stereo amplification in car Radio. The IC can output a maximum current of 3.5A and features very low harmonic and crossover distortion.
Amphenol SV Microwave extreme RF cable assemblies feature low solder wicking and high flexibility.
Amphenol’s easy-to-use Amphe-PPM push/pull connectors provide rapid positive mating in limited space.
Amphenol Sine Systems A Series™ heavy duty connectors excel in demanding interconnect applications.
The Amphenol ICC – FCI Basics’ BergStak® FX10 high-density connectors support high-speed performance.
Amphenol ICC’s industry-leading QSFP DD connectors are ideal for high-speed serial applications.
Amphenol ICC’s high-speed and high-power Cool Edge connectors support most BTB applications.
Amphenol LTW’s M12 field-installable connectors allow quick termination for A, D, and X codes.
Amphenol’s NPA sensors offer a practical solution for applications requiring calibrated performance.
Latest Posts
LinkSwitch-TN2 – Automotive Grade Switching IC for Space Saving Buck and Flyback Applications
STNRGPF02 - New Power Supply Controller IC for DSP and Microcontroller based Applications
