Power Amplifier

TDA7293
TDA7293
ICs | 2024-06-07

TDA7293 100-watt, DMOS Audio Amplifier with Mute and Standby

The TDA7293 is a powerful class AB audio amplifier IC suitable for high-quality audio systems. The TDA7293 features a DMOS power stage, which offers high efficiency and low distortion. The TDA7293 can deliver up to 100 watts of power with an 8-ohm load.
LM3886
LM3886
ICs | 2024-05-20

LM3886 High-Performance 68W Audio Power Amplifier

The LM3886 is a high-performance audio power amplifier which is capable of delivering 68W of continuous power with 0.1% THD+N (Total Harmonic Distortion + Noise). The peak output power of this IC is about 135 watts.
TDA2002
TDA2002
ICs | 2024-05-20

TDA2002 8W Hi-Fi Audio Power Amplifier

The TDA2002 is a cheap, 8W class B audio power amplifier that is designed for use in car stereos and portable audio systems. This is a 5-pin compact, reliable, and efficient amplifier IC. We can get up to 15w power by bridging 2 TDA2002 ICs together.
Thin Film High Power Chip Resistors
Thin Film High Power Chip Resistors
Resistors | 2022-09-14

TFHP Series: Thin Film High Power Chip Resistors for Precision Power Supply, Power Amplifier, and Process Control Applications

TT Electronics has introduced its TFHP series of thin film, high-power chip resistors that combines high power and high precision in a single resistor and saves the printed circuit board (PCB) area.
AD8324ACPZ Line Driver
AD8324ACPZ Line Driver
ICs | 2022-01-13

AD8324ACPZ - 3.3 V Differential Line Driver IC

The AD8324 is a low-cost amplifier designed for coaxial line driving. The features of the AD8324 are best suited for DOCSIS 2.0 and EuroDOCSIS applications.
AD620 Instrumentation Amplifier
AD620 Amplifier
ICs | 2021-10-20

AD620 Low-Power Instrumentation Amplifier

The AD620 is a low-cost, low-power, high accuracy instrumentation amplifier that requires only one external resistor to set gains of 1 to 10,000.
GMICP2731-10 GaN MMIC from Microchip Technology
GMICP2731-10 GaN MMIC from Microchip Technology
ICs | 2021-06-23

GMICP2731-10 GaN MMIC Power Amplifier for High RF Output and Signal Quality in Satellite Communications

Microchip Technology has introduced the new GMICP2731-10 Ka-band MMIC (Monolithic Microwave Integrated Circuit) power amplifier that is fabricated based on GaN-on-Silicon Carbide (SiC) technology.
FDA901 Class-D Audio amplifier IC
FDA901 Class-D Audio amplifier IC
Audio | 2020-03-06

FDA901 – New Class D 4x50W Power Audio Amplifier IC for High Fidelity Car Audio Systems

STMicroelectronics leverages the expertise of the Alps Alpine Co. Ltd.
TDA2822 Dual Power Amplifier
TDA2822 Dual Power Amplifier
ICs | 2020-03-04

TDA2822 Dual Power Amplifier

The TDA2822 is a dual low power audio amplifier in an 8-Pin plastic dual in-line package. This IC comes with features like low crossover distortion, low quiescent current, and supply voltage range of this IC is 3V to 15V.
LM4871 Audio Amplifier IC
LM4871 Audio Amplifier IC
ICs | 2019-12-04

LM4871 Audio Power Amplifier

The LM4871 is a mono bridged audio power amplifier capable of delivering 3W of continuous average power into a 3Ω load with less than 10% THD when powered by a 5V power supply.

MPLAB® PICkit™ 5 In-Circuit Debugger
MPLAB® PICkit™ 5 In-Circuit Debugger

Microchip's MPLAB PICkit 5 in-circuit debugger features improved programmer-to-go (PTG) support

Battery Monitoring Circuits
Battery Monitoring Circuits

A protection IC for three-serial to five-serial cell lithium-ion rechargeable batteries

UAM Wi-Fi Triple Band Antennas
UAM Wi-Fi Triple Band Antennas

TE Connectivity's UAM Wi-Fi Triple Band Antennas offer a compact alternative for terminal antennas

NCS21801 Op Amp
NCS21801 Op Amp

onsemi's op amp is suitable for both high-side and low-side current sensing applications

MCE Series AC/DC Power Supplies
MCE Series AC/DC Power Supplies

3W-40W PCB mount Medical AC-DC Power Supplies for Class II and BF-rated medical applications

RM Series Aluminum Rack Cases
RM Series Aluminum Rack Cases

Hammond’s RM series aluminum cases are suitable for 19” rackmount or desktop/benchtop applications.

T6793 CO2 Sensor Module
T6793 CO2 Sensor Module

T6793 CO2 sensor module is designed for applications requiring high-performance in a compact package

Opta Expansions
Opta Expansions

16 programmable inputs for connecting digital sensors and eight more relays to operate machines