Skip to main content

Stepper Motor

DRV8833 Motor Driver IC
DRV8833 Motor Driver IC

DRV8833 Dual H-Bridge Motor Driver

The DRV8833 is a two-channel H-bridge motor driver that can be used to drive two DC motors or one stepper motor.
TMC2130 Motor Driver IC
TMC2130 Motor Driver IC

TMC2130 Motor Driver IC

The TMC2130 is an integrated motor driver specifically meant for high voltage two-phase stepper motors with an SPI and STEP/DIR interface.
Stepper Motor Driver ULN2003A IC
Stepper Motor Driver ULN2003A IC

ULN2003 Motor Driver IC

ULN2003 IC is one of the most commonly used Motor driver IC generally used when we need to drive high current loads using digital logic circuits like Op-maps, Timers, Gates, Arduino, PIC, ARM etc.
Maxim Integrated's TMCM-1321 Trinamic Servo Driver Module
Maxim Integrated's TMCM-1321 Trinamic Servo Driver Module

Single-axis controller/driver module for two-phase bipolar stepper motors integrates motion control to speed transfer time, reduce solution size and save energy

TRINAMIC Motion Control GmbH & Co. KG introduces the smallest and lowest-power single-axis servo controller/driver module with integrated motion control.
28BYJ-48 Stepper Motor
28BYJ-48 Stepper Motor

28BYJ-48 - 5V Stepper Motor

The 28-BYJ48 Stepper Motors are one of the most commonly used stepper motors. You can find this or similar motors in your DVD drives, Motion camera and many more similar devices.
Stepstick Protector
Stepstick Protector

Stepstick Protector

Stepstick protector plug is an add-on module to protect precious stepper motor drivers.
TMC2209 Stepper Motor Driver Module
TMC2209 Stepper Motor Driver Module

TMC2209 Stepper Motor Driver Module

The TMC2209 is an ultra-silent motor driver IC for two-phase stepper motors. The driver has a maximum output capacity of 28 V and ± 2 A. It can operate bipolar stepper motors from 1 to 1/256 step modes.
DRV8825 Stepper Motor Driver Module
DRV8825 Stepper Motor Driver Module

DRV8825 Stepper Motor Driver Module

The DRV8825 is a Motor Driver with two H-bridge drivers and a microstepping indexer. The driver has a maximum output capacity of 45 V and ± 2.5 A. It can operate bipolar stepper motors in full, 1/2, 1/4, 1/8, 1/16 and 1/32-step modes.
NEMA 23 Stepper Motor
NEMA 23 Stepper Motor

NEMA 23 Stepper Motor

NEMA 23 is a stepper motor with a 2.3×2.3 inch (58.4×58.5 mm) faceplate and 1.8° step angle (200 steps/revolution). Each phase draws 2.8 A at 3.2 V, allowing for a holding torque of 19 kg-cm.
NEMA 17 Stepper Motor
NEMA 17 Stepper Motor

NEMA 17 Stepper Motor

NEMA 17 is a hybrid stepping motor with a 1.8° step angle (200 steps/revolution). Each phase draws 1.2 A at 4 V, allowing for a holding torque of 3.2 kg-cm. NEMA 17 Stepper motor is generally used in Printers, CNC machines and Laser Cutters.