Skip to main content

TDA7265 - 25 +25W Stereo Audio Amplifier IC

[Click the image to enlarge it]

TDA7265 is a 25 Watt + 25 Watt stereo audio amplifier IC. The chip is a class AB dual audio power amplifier in Multiwatt package specifically designed for high quality sound application as music centers and stereo TV sets.

 

Pin Configuration

TDA7265 is an eleven pin device as shown in pin diagram and function of each pin is described below.

Pin Number

Pin Name

Description

1

-Vs

Negative power supply is connected to this pin in dual supply mode operation of the chip

2

OUTPUT 1

Amplified output of channel A is provided at this pin

3

+Vs

Positive power supply is connected at this pin

4

OUTPUT 2

Amplified output of channel B is provided at this pin

5

MUTE

This pin is pulled low to disable the audio output

6

-Vs

Negative power supply is connected to this pin in dual supply mode operation of the chip

7

IN+(2)

Non-inverting input of channel B amplifier in the chip

8

IN-(2)

Inverting input of channel B amplifier in the chip

9

GND

This pin is connected to the ground

10

IN+(1)

Inverting input of channel A amplifier in the chip

11

IN+(1)

Non-inverting input of channel A amplifier in the chip

 

Features and Electrical characteristics

  • High output power : 25 + 25 W @ RL = 8 Ω, Vs = ± 20V
  • Wide operating supply voltage range
  • Output short circuit protection
  • Thermal overload protection
  • Very low number of components required to get the amplifier working
  • No pop at turn-on/off
  • Mute enable pin available
  • Stand-by feature (low Iq)
  • Split supply
  • Operating voltage range: ±5 to ±25V
  • Maximum supply voltage:±25V
  • Maximum repetitive current allowed to draw through each output: 4.5A
  • Total power dissipation:30W
  • Operating temperature: -20°C  to +85°C
  • Storage Temperature: -40°C  to +150°C

 

Where to use TDA7265

TDA7265 is basically used in applications where high quality audio power amplification and high efficiency both are required. The device being class AB dual audio power amplifier specifically designed for such high quality sound applications. With high power output capacity the chip can also be used for driving loud speakers and woofers.

 

How to use TDA7265

There is no need to design new circuits for the device TDA7265 as the application circuit diagram for the chip is already given in the datasheet of the component. The design of application circuit is optimized for best performance and so using it in applications is ideal. All you need to do is connect the components as given in the circuit diagram to get the amplifier working.

TDA7265 Audio Amplifier Circuit Diagram

The above circuit is powered from two power supply units, one being positive voltage +Vs and other being negative voltage -Vs. The mute is triggered low from a microprocessor to disable output under requirement. Here the chip drives a two 25Watt speaker to its peak.  The audio input for channel A is given at pin7 and the amplified output is listened though LEFT speaker. Similarly audio input for channel B is given at pin11 and the amplified output is listened though RIGHT speaker.

TDA7265 Single Supply Audio Amplifier Circuit

Here TDA7265 is powered from single supply voltage source +Vs and the mute is triggered low by a separate control unit. As above the chip drives a two 25Watt speaker to its peak here.  The audio input for both channels and amplified outputs are provided the same as dual supply operation.

 

There are other applications circuits similar to the above one in the datasheet to provide additional circuit configurations for the user. The user can use those configurations to design his applications.

 

Applications

  • Audio power amplifiers
  • Stereo TV sets
  • Hi-Fi music centers
  • Guitar amplifiers
  • Music players
  • Woofer amplifiers
  • Hobby projects

 

2D Model

TDA7265 Dimensions

Component Datasheet

Comments