12-0-12 Center Tapped Transformer
Transformer Terminal Description
No:
Terminal Name
Description
1
I1 and I2
These are the input wires for…
Electronics Components
MPU9250 9-DOF MEMS Sensor Module
The MPU9250 integrates an accelerometer, a gyroscope, and a magnetometer into a single small package. The MPU9250 has the needed pull-up and pull-down resistors for the I2C/SPI…
N76E003AT20 Microcontroller Unit
N76E003AT20 is a microcontroller unit with 8051 based 8-bit architecture with 18 kilobytes of Flash. It has a powerful 16 MHz CPU and has a configurable LDROM of 4K/3K/2K/1K/0K…
RCWL0516 Microwave Distance Sensor Module
The RCWL0516 Microwave distance sensor uses microwave frequencies in a simple implementation of a Doppler radar. The circuitry inside the chip processes the signal and outputs an…
5V 8-Channel Relay Module
The eight-channel relay module contains eight 5V relays and the associated switching and isolating components, which makes interfacing with a microcontroller or sensor easy with…
WS2812B Addressable RGB LED
The WS2812B Addressable RGB LED is extremely flexible, easy-to-use, and can be controlled separately. These LEDs are equipped with an integrated driver that allows users to…
5V Four-Channel Relay Module
The four-channel relay module contains four 5V relays and the associated switching and isolating components, which makes interfacing with a microcontroller or sensor easy with…
5V Dual-Channel Relay Module
The dual-channel relay module is more or less the same as a single-channel relay module, but with some extra features like optical isolation. The dual-channel relay module can be…
Photodiode
What is Photodiode? Photodiodes, as the name suggest, are just another type of diodes having an anode and cathode similar to normal LEDs. But, unlike LEDs they do not emit light.…
Optical Dust Sensor - GP2Y1010AU0F
Sharp's GP2Y1014AU0F is a tiny six-pin analog output optical air quality/optical dust sensor that is designed to sense dust particles in the air. It works on the principle of…
Microchip's MPLAB PICkit 5 in-circuit debugger features improved programmer-to-go (PTG) support
A protection IC for three-serial to five-serial cell lithium-ion rechargeable batteries
TE Connectivity's UAM Wi-Fi Triple Band Antennas offer a compact alternative for terminal antennas
onsemi's op amp is suitable for both high-side and low-side current sensing applications
3W-40W PCB mount Medical AC-DC Power Supplies for Class II and BF-rated medical applications
Hammond’s RM series aluminum cases are suitable for 19” rackmount or desktop/benchtop applications.
T6793 CO2 sensor module is designed for applications requiring high-performance in a compact package
16 programmable inputs for connecting digital sensors and eight more relays to operate machines