MCP4725 Digital to Analog Converter IC
MCP4725 IC from Microchip Technology, is a Single Channel, 12-Bit Digital-to-Analog Converter with integrated EEPROM and an I2C Compatible Serial Interface which is compact in…
Electronics Components
CR1225 Coin Cell Battery Holder
The CR1225 battery Holder is a small and compact device designed to be used as RTC backup and SRAM backup for GPS units. This holder holds the battery in place with friction. The…
BC847 NPN SMD Transistor
BC847 is an NPN transistor so when no power is applied to the base, the collector and emitter will be left open (Reverse biased) and when a positive voltage is applied to the base…
BC559 General Purpose PNP Transistor
The BC559 transistor is a general-purpose PNP transistor. This transistor also comes with many different versions, if you are using this transistor as an amplifier make sure you…
BC547 N-Channel General Purpose Transistor SMD
The BC547 is an SMD SOT23-3 package NPN Transistor with VCE of 45V and a collector current of 100mA. It can be used as a small signal switching transistor. It also has a low base…
BC327 PNP General Purpose Transistor
BC327 is a general purpose PNP Transistor, the base of which needs to be connected to the ground, to turn on the transistor. This transistor is available in various versions and…
3.5mm Audio Jack (Male)
The audio jacks was invented in the 19th century for the purpose of use in telephone switchboards and still used widely to transfer analog audio signals.
35mm Audio Jack…
IRF510 N-channel Power MOSFET
IRF510 is a third-generation Power MOSFET with the best combination of fast switching and low on-state resistance. This component is available at a lower cost. Hence, it is widely…
BC108 NPN Metal Can Transistor
BC108 is a generic semiconductor device that can be used to amplify or switch signals or power. The BC108 is an NPN Transistor, hence we need to provide a small amount of positive…
IRF630 N-Channel Power MOSFET
IRF630 is a third-generation power MOSFET specially designed for applications which required high-speed switching. This component is a great combination of low on-state resistance…
Microchip's MPLAB PICkit 5 in-circuit debugger features improved programmer-to-go (PTG) support
A protection IC for three-serial to five-serial cell lithium-ion rechargeable batteries
TE Connectivity's UAM Wi-Fi Triple Band Antennas offer a compact alternative for terminal antennas
onsemi's op amp is suitable for both high-side and low-side current sensing applications
3W-40W PCB mount Medical AC-DC Power Supplies for Class II and BF-rated medical applications
Hammond’s RM series aluminum cases are suitable for 19” rackmount or desktop/benchtop applications.
T6793 CO2 sensor module is designed for applications requiring high-performance in a compact package
16 programmable inputs for connecting digital sensors and eight more relays to operate machines