BQ27220 - Single-Cell Fuel Gauge IC
The BQ27220 is a high-precision low-power fuel gauge IC manufactured by Texas Instruments. The BQ 27220 device uses the Compensated End-of Discharge Voltage (CEDV) algorithm to monitor the battery parameters.
Datasheet
L4941-5V 1A Low Voltage Drop Regulator
The L4941 is a 5V low dropout positive voltage regulator. It can regulate the output voltage even when the input voltage is only slightly higher than the output voltage. This is beneficial in battery-operated systems where maximizing battery life is crucial.
NCP3170 – Synchronous Buck Regulator
The NCP3170 is a synchronous buck regulator with integrated switching elements. It has a wide Input Voltage Range from 4.5V to 18V and it can deliver up to 3A output current. The NCP3170 uses current mode control for fast transient response and easy loop compensation.
TDA7293 100-watt, DMOS Audio Amplifier with Mute and Standby
The TDA7293 is a powerful class AB audio amplifier IC suitable for high-quality audio systems. The TDA7293 features a DMOS power stage, which offers high efficiency and low distortion. The TDA7293 can deliver up to 100 watts of power with an 8-ohm load.
LA4440 6W 2-Channel Power Amplifier
The LA4440 is a high-performance, dual-channel audio power amplifier IC manufactured by Sanyo. It is a low-cost cost widely used audio amplifier IC. Once was one of the most popular choices for car stereos and portable boomboxes.
LM3886 High-Performance 68W Audio Power Amplifier
The LM3886 is a high-performance audio power amplifier which is capable of delivering 68W of continuous power with 0.1% THD+N (Total Harmonic Distortion + Noise). The peak output power of this IC is about 135 watts.
TDA2002 8W Hi-Fi Audio Power Amplifier
The TDA2002 is a cheap, 8W class B audio power amplifier that is designed for use in car stereos and portable audio systems. This is a 5-pin compact, reliable, and efficient amplifier IC. We can get up to 15w power by bridging 2 TDA2002 ICs together.
MCP2200 - USB 2.0 to UART Protocol Converter with GPIO
The MCP2200 is a USB -to-UART serial converter chip developed by Microchip Technology.
CH341 High-Speed USB to Serial Chip
The CH341 is a convenient and cost-effective USB-to-serial UART converter chip designed by WCH (Nanjing QinHeng Corp).
CH343 - High-Speed USB to Serial Chip
The CH343 is a USB bus converter chip, which converts USB to a high-speed serial UART interface.
MCX W: Bluetooth LE, Zigbee, and Matter over Thread multiprotocol MCUs
The ECX-1637B is a low-aging crystal. This component is ideal for wireless and IoT applications.
AlphaWire introduces the EcoCable Mini Cable: the smallest solution to your biggest cable problems
The ACS71240 is designed to replace shunt resistors in applications that require small size.
InnoSwitch™3-EP family of offline CV/CC QR flyback switcher ICs feature 900 V PowiGaN™ GaN switches.
FSP open frame power supply units with many form factor and power ratings
Highest magnetic sensitivity, lowest power consumption, smaller size compared to Hall, AMR, and GMR
Magnetic current sensors are a compelling alternative to traditional shunt-based solutions
