Skip to main content

NTE960 5V Positive Voltage Regulator

[Click the image to enlarge it]

The NTE960 is a 5V Voltage regulator IC with a maximum output current of upto 1A. It requires no external components and has in-built short-circuit and thermal overload protection.

 

Pin Configuration

Pin Number

Pin Name

Description

1

Input (V+)

Unregulated Input Voltage

2

Ground (Gnd)

Connected to Ground

3

Output (Vo)

Outputs Regulated +5V

 

NTE960 Regulator Features

  • 5V Positive Voltage Regulator
  • Output current: 1A
  • Minimum Input Voltage is 7V
  • Voltage drop: 2V
  • Load Regulation 100mV
  • Internal Thermal Overload and Short circuit current limiting protection is available.
  • Junction Temperature maximum 125 degree Celsius
  • Available in TO-220

Note: Complete Technical Details can be found at the NTE960 datasheet given at the end of this page.

 

NTE960 Equivalent 

LM7805

 

Alternative Regulator ICs   

LM7806, LM7809, LM7812, LM317, LM7905, LM7912, LM117V33, XC6206P332MR.

 

Brief Description on NTE960

Voltage regulators are very common in electronic circuits. They provide a constant output voltage for a varied input voltage. The most commonly used Voltage Regulator is the LM7805 to get a constant regulated voltage of +5V. The NTE960 acts as a dire ct replacement for the LM7805 IC. But the NTE960 can provide only less current than the 7805.

The output current of this IC can go up to 1A. But, the IC suffers from heavy heat loss hence a Heat sink is recommended for projects that consume more current. It has a load regulation of 100mV and laso has in built thermal short circuit protection.

 

7805 Applications

  • Constant +5V output regulator to power microcontrollers and sensors in most of the projects
  • On-card regulation circuit
  • Current Limiter for certain applications
  • Power supply circuits
  • Output Polarity-Reversal-Protection Circuit

 

2D model of the component

NTE960 5V Positive Voltage Regulator 2-D Model

Component Datasheet