SS310 Schottky Diode (SMD)
SS310 is a surface mount Schottky Diode with a Low power loss, high efficiency and High surge current capability. It is commonly used in high-frequency Inverters, Polarity Protection applications etc.
Pin Configuration
Pin No. |
Pin Name |
Description |
1 |
Anode |
Current always Enters through Anode |
2 |
Cathode |
Current always Exits through Cathode |
Features
- SMD Schottky Barrier rectifier
- Forward Current (IF): 3A
- Maximum Forward Voltage (VF): 0.85V (@3A)
- Reverse Current (IR): 20uA
- Maximum DC Blocking Voltage: 100V
- Diode Marking: “30LW”
- Available in SOD-123W Package
Note: Complete Technical Details can be found at the SS310 datasheet given at the end of this page.
Alternative for SS310: SS54, SS14, SS34
Other Schottky Diodes: bat85, 1N4148, 1N4733A, Zener Diode
SS310 Diode Overview
A diode is a device which allows current flow through only one direction. That is the current should always flow from the Anode to cathode. The cathode terminal can be identified by using the color band. The marking details on the actual diode is shown below
Compared to normal diodes Schottky diode also has relatively faster switching speeds and hence can be used in high-frequency switching circuits. It also has low forward drop voltage, the voltage drop across the SS310 diode is 0.85V.
As shown in the graph the Diode has a minimum voltage drop of 0.4V across it when 0.1A is flowing through it, as the current increases the Voltage drop across the diode also increase. The maximum current through the diode is 3A and the maximum reverse voltage is 100V. It can also handle a maximum surge of 80A. The complete details of the diode can be found at the datasheet below.
Applications of Diode
- Can be used to prevent reverse polarity problem
- High-Frequency Inverters
- Used as a protection device
- Current flow regulators
- Polarity Protection applications
2D representation (SOD-123W)
This diode is available in SOD-123W package. The dimensions for the package is shown below