Skip to main content

8x8 Dot Matrix Display Module with MAX7219 Driver IC

The 8x8 Dot Matrix Display Module has a MAX7219 driver IC and an 8x8 LED Matrix. All common microcontrollers can be connected to this module by using a 4-wire serial interface. This 8x8 DMD Module requires only 3 I/O lines for driving the display. There is also another version of this MAX7219 8x8 Dot matrix Display Module, which is more popular and is smaller in size you can also check that out if interested. 

 

Features And Specifications 

  • Input voltage: 5V
  • Maximum Operating Current: 320 mA
  • Forward Voltage for Each Segment or LED (Turning ON): 1.5V - 2.0V
  • Forward Current for Each Segment or LED (During ON): 10mA - 15mA
  • Maximum Operating Temperature: - 25°C to + 60°

Alternatives 

MAX7219 Dot Matrix 4 in 1 Display, LTP-305HR

 

Pin Configuration 

The 8x8 Dot Matrix Display Module consists of 10 Pins. There are two pin series on both sides of the module. The pin series alongside the MAX7219 IC Consists of 3 driver pins (DIN, CS, CLK) to drive the display and two power pins (Vcc, GND) for powering the module.

 

The other one is just on the opposite side of the first one, covered by the LED matrix. Use these pins while connecting multiple 8x8 Dot Matrix Displays in Series with each other. These pins consist of almost the same pins as the first one; the only difference is the DOUT Pin which allows you to connect with the DIN pin of another Module.

Pin Type

Pin Description

Vcc

5V Input Voltage

GND

Ground

CS

Chip Select

CLK

Clock

DIN

Data-In

DOUT

Data Out (Use for Multiple Display Interfacing)

Note: Both sides contain VCC, GND, CS, CLK pins.

 

Description

The MAX7219 IC is a compact and serial input/output common-cathode display driver. This IC is developed by Maxim Integrated, California. The presence of the MAX7219 IC on the 8x8 Display Module will give you a very easy interfacing experience with any development boards.

 

The 8x8 Led Matrix modules are available in different modules and each of the modules will have different pin configurations, but they have the same functioning pins.

 

Connecting an 8x8 Dot Matrix Display Module to an MCU/MPU

You can easily interface the 8x8 DMD Module with the MCU/MPU. Connect the driver pins (DIN, CS, CLK) to the digital I/O pins of the microcontroller. The following diagram shows the connection of an 8x8 Dot Matrix Display Module.

 

Connection diagram of 8x8 Dot Matrix Display Module

8x8 Dot Matrix Display Module Microcontroller Circuit Connections

 

Applications 

The 8x8 Dot Matrix Display Modules can be used as the following:

  • Outdoor Display
  • Table Clock
  • As a Weather Display
  • Character Design
  • Displaying Results

 

2D Model

The 2D Model of the 8x8 Dot Matrix Display Module with dimensions, which will help to make custom PCBs.

8x8 Dot Matrix Display Module Dimensions

Related Post



Join 20K+subscribers

We will never spam you.

* indicates required

Be a part of our ever growing community.