Xiao ESP32-C3 IoT Development Board
Seeed Studio XIAO ESP32C3 is an IoT mini development board based on the Espressif ESP32-C3 WiFi/Bluetooth dual-mode chip in a very tiny form factor. The ESP32-C3 chip is built around 32-bit RISC-V architecture with four stage pipeline and a Floating-Point Unit (FPU) for precision arithmetic operations. The chip also has 2.4GHz WiFi and Bluetooth 5(LE) support.
XIAO ESP32C3 Pinout Configuration
Pin No. |
Name |
Type |
Function |
1 |
D0 |
I/O |
GPIO2/A0 |
2 |
D1 |
I/O |
GPIO3/A1 |
3 |
D2 |
I/O |
GPIO4/A2 |
4 |
D3 |
I/O |
GPIO5/A3 |
5 |
D4 |
I/O |
GPIO6/SDA |
6 |
D5 |
I/O |
GPIO7/SCL |
7 |
D6 |
I/O |
GPIO21/TX |
8 |
D7 |
I/O |
GPIO20/RX |
9 |
D8 |
I/O |
GPIO8/SCK |
10 |
D9 |
I/O |
GPIO9/MISO |
11 |
D10 |
I/O |
GPIO10/MOSI |
12 |
3.3V |
POWER |
3.3V |
13 |
GND |
POWER |
Ground pin |
14 |
5V |
POWER |
5V Supply |
Features
- Powerful CPU: ESP32-C3, 32bit RISC-V singlecore processor that operates at up to 160 MHz
- Complete WiFi subsystem: Complies with IEEE 802.11b/g/n protocol and supports Station mode, SoftAP mode, SoftAP + Station mode, and promiscuous mode
- Bluetooth LE subsystem: Supports features of Bluetooth 5 and Bluetooth mesh
- Ultra-Low Power: Deep sleep power consumption is about 43μA
- Better RF performance: External RF antenna included
- Battery charging chip: Supports lithium battery charge and discharge management
- Rich on-chip resources: 400KB of SRAM, and 4MB of on-board flash memory
- Ultra-small size: As small as a thumb(20x17.5mm) XIAO series classic form factor for wearable devices and small projects
- Reliable security features: Cryptographic hardware accelerators that support AES-128/256, Hash, RSA, HMAC, digital signature, and secure boot
- Rich interfaces: 1xI2C, 1xSPI, 1xI2S, 2xUART, 11xGPIO(PWM), 4xADC, 1xJTAG bonding pad interface
- Single-sided components, surface mounting design
Specifications
- Processor
- ESP32-C3 SoC
- RISC-V single-core 32-bit chip processor with a four-stage pipeline that operates at up to 160 MHz
- Wireless
- Complete 2.4GHz Wi-Fi subsystem
- Bluetooth 5.0/ Bluetooth mesh
- On-chip Memory
- 400KB SRAM & 4MB Flash
- Interface
- 1x UART
- 1x IIC
- 1x IIS
- 1x SPI
- 11x GPIO(PWM)
- 4x ADC
- 1x Reset button
- 1x Boot button
- Dimensions
- 21 x 17.5mm
- Power
- Circuit operating voltage: 3.3V@200mA
- Charging current: 50mA/100mA
- Input voltage (VIN): 5V
- Deep Sleep Power Consumption
- Deep Sleep Model: >44 μA
- Wi-Fi Enabled Power Consumption
- Active Model: <75 mA
- Modem-sleep Model: <25 mA
- Light-sleep Model: <4 mA
- BLE Enabled Power Consumption
- Modem-sleep Model: <27 mA
- Light-sleep Model: <10 mA
Applications
The XIAO ESP32C3 suit for applications such as:
- Internet of Things
- Wearable devices
- Health monitoring
- Education
- Low-Power(LP) networking
- Rapid prototyping
Component overview
Upgrade Your Game with the Foremost Ranking Programs for Firms