Skip to main content

MPSA06 NPN Amplifier Transistor

[Click the image to enlarge it]

The MPSA06 is an 80V 500mA general purpose NPN transistor with a maximum gain value of 100.  This makes the transistor suitable for amplifier applications.

 

Pin Configuration

Pin Number

Pin Name

Description

1

Emitter

Current Drains out through emitter, normally connected to ground

2

Base

Controls the biasing of transistor, Used to turn ON or OFF the transistor

3

Collector

Current flows in through collector, normally connected to load

 

Features

  • General Purpose NPN Transistor
  • DC Current Gain (hFE) 100
  • Continuous Collector current (IC) is 500 mA
  • Collector-Emitter voltage (VCE) is 80V
  • Collector-Base voltage (VCB) is 80V
  • Transition Frequency: 100MHz
  • Available in To-92, SOT-23 and SOT-223 Package

 

Note: Complete Technical Details can be found at the MPSA06 datasheet given at the end of this page.

Complementary PNP Transistor: MPSA56

MPSA06 Equivalent NPN Transistor: 2SC2882, BC387, 2N4401

 

Where to use MPSA06

The MPSA06 is a general purpose NPN transistor that is commonly used in Amplifier applications. The Transistor can switching voltages up to 80V with a current value of less than 500mA, making it suitable for lower power switching applications. It also has a gain value of 100 and is most commonly used in Audio Amplifier circuits. 

This NPN transistor also has its counterpart PNP transistor the MPSA56, which makes it ideal for Push-pull and class B amplifier designs. Apart from this the transistor can also be used for switching low power devices.

 

Applications

  • General purpose switching 
  • Class B amplifiers
  • Pre-amplifier circuits
  • Push-Pull configuration circuits

 

2D-Model

2D dimensions will help you in placing this component at the time of making circuit on perf board or a PCB.

  MPSA06 NPN Amplifier Transistor 2-D Model

 

Component Datasheet

Get Our Weekly Newsletter!

Subscribe to stay updated with industry's latest Electronics components and news

* indicates required