MJE13005 NPN Transistor

The MJE13005 is a high voltage high speed NPN Transistor. It has a high collector emitter voltage of 400V with a continuous collector current of 4A. The Transistor has very low fall time making it suitable for switching AC voltage (115V/220V) for converter and inverter applications.

 

MJE13005 Pinout Configuration 

Pin Number	Pin Name	Description
1	Base	Controls the biasing of transistor, Used to turn ON or OFF the transistor
2	Collector	Current flows in through collector, normally connected to load
3	Emitter	Current Drains out through emitter, normally connected to ground

 

Features 

• High Voltage NPN Transistor
• DC Current Gain (h_FE) 8 to 40
• Continuous Collector current (I_C) is 4A 
• Collector-Emitter voltage (V_CE) is 400 V
• Collector-Base voltage (V_CB) is 700V
• Emitter Base Voltage (V_BE) is 9V
• Base current is 2A (max)
• Available in To-220 Package

 

Note: Complete Technical Details can be found at the MJE13005 datasheet given at the end of this page.

 

MJE13005 Equivalent

2SC3795, MJE13007, KSE13007

 

Other NPN Power Transistors 

BD139, 2SC5200, 2N3055, TIP31C, MJE13001

 

Where to use MJE13005 Transistor

The MJE13005 is a high voltage NPN transistor with a collector Emitter voltage of 400V and collector current of 4A, it also has a high switching speed of 0.9uS making it ideal choice in high voltage high speed switching circuits for Converter and inverter applications. 

Apart from this the transistor is also used in simple relay or solenoid driver circuits because of its ability to handle peak current upto 8A

 

How to use MJE13005 Transistor 

Because of the high switching voltage and switching current the MJE13005 has a high base voltage of 9V and requires about 2A closing the switching completely when operating across very high voltage. This brings in the need to have a transistor driver circuit for the MJE13005. These are commonly used in SMPS designs along with a switching transformer to switch AC voltage of 115V or 220V at high frequencies. 

Since the IC is available in TO-220 format it is relatively simple to use. The transistor has a collector dissipation power of 75W, hence a heat sink will b mandatory when operating at high voltages. 

 

Applications

• high current switching (upto 4A) loads
• DC-DC Converters
• Inverters
• Speed control of Motors
• Relay/Solenoid driver

 

2D-Model and Dimensions

2D dimensions will help you in placing this component at the time of making circuit on perf board or a PCB.